Battery To Starter Cable With Terminals And Terminal Covers
Precautions for removing the car battery starting cable
1. Do not disconnect the battery cable before reading the fault code
After the power is turned off, the fault code of the control unit will be automatically eliminated, which will affect your judgment of the fault. Therefore, the current fault code must be recorded before the power failure, and then consider the power failure.
2. Do not disconnect the battery cable when the ignition switch is in the ON state
Sudden disconnection of the battery cable will cause the coil in the circuit to generate self-inductive electromotive force, which will easily damage the computer board or sensor.
3. The fault code cannot be cleared by removing the battery cable at will.
For some engines, disconnecting the battery cable can clear the currently stored fault codes, but for some engines, after disconnecting the battery, the anti-theft and navigation will be locked. So it can't be cut off at will.
4. When replacing the battery, first disconnect the negative electrode, then disconnect the positive electrode, and install it in the opposite way.
Because cars are all negative ground, negative ground can prevent electromagnetic interference. When a power outage is required during vehicle maintenance, as long as the battery negative stage is removed, it is not easy to cause a short circuit.
5. When installing the battery positive and negative cables, be sure to install them in place and tighten them with standard torque.
Re-maintenance must be careful and careful, and every link must be done in one step to prevent excessive failures and cause customer complaints.
Product parameters:
| products name | Battery To Starter Cable With Terminals And Terminal Covers |
| Material | Wire: high temperature resistant wire or irradiated wire [QVR-105℃, AEX(F), STX, SGX];
Bellows: Nylon (PA);
Dust jacket: fluorine rubber, EPDM or neoprene;
Tape: cloth base or high temperature resistant tape (gray);
Terminals: matt tin plated; battery clips - copper tin plated or zinc, lead-tin alloy;
Heat shrinkable tube: cross-linked polyolefin (PE), continuous use temperature -55~125℃. |
| Connector | All kinds of connectors are available |
| Color | All colors are available |
| MOQ | Welcome Small quantity, even 100pcs |
| Standards | Under IPC/WHMA-620 Standards |
| Quality | 100% tested before delivery, Never use Fake materials |
Product Tags:
|
|
Copper Battery Starter Cable , Battery Booster Cables With Terminals / Terminal Covers Images
|
